salut a tous voila mon probleme: quand j'essaie de graver un dvd, tout va très bien (création des images, burn...)après ca rendu a la fin il est marqué qu,il ya une erreur puis quand je regarde sur mon dvd c,est qu,il y a qqch déja dedans mais je n,arrive pas a le lire. qqu a une solution pour ca ? je pense que le dvd est protégé. voici le rapport pendant le gravure 1A21-0609-4130-2329-8874-5560 Windows XP 5.1 IA32 WinAspi: - ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004-10-26 18:35:34 Nero Version: 6.6.0.14 Internal Version: 6, 6, 0, 14d (Nero Express) Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 2 TA 1 - 6.6.0.14 Adapter driver: <> HA 2 Drive buffer : ####kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRAM GSA-4163B>Version: A103 - HA 2 TA 1 - 6.6.0.14 Adapter driver: <> HA 2 === Scsi-Device-Map === DiskPeripheral : WDC WD400JB-32ENA0 05.0 nvidesm Port 0 ID 0 DMA: Off DiskPeripheral : WDC WD400BB-00DEA0 05.0 nvidesm Port 0 ID 1 DMA: Off CdRomPeripheral : HL-DT-STDVDRAM GSA-4163BA103 nvidesm Port 0 ID 0 DMA: Off CdRomPeripheral : SONY CD-RW CRX230E QYS1 nvidesm Port 0 ID 1 DMA: Off CdRomPeripheral : AXV CD/DVD-ROM 2.0B a347scsi Port 1 ID 0 DMA: Off === CDRom-Device-Map === AXV CD/DVD-ROM H: CDRom2 SONY CD-RW CRX230E G: CDRom1 HL-DT-ST DVDRAM GSA-4163B F: CDRom0 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical Memory : 1279MB (1310192kB) Free physical Memory: 977MB (1001004kB) Memory in use : 23 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 9.8.2005 ===== Disc-Copy over image - 1st step : Copy to image ... 11:50:20 #1 Text 0 File Reader.cpp, Line 127 Reader running 11:50:20 #2 Text 0 File Writer.cpp, Line 122 Writer Image Recorder running 11:50:20 #3 Text 0 File DVDCopy.cpp, Line 279 DVD Track-Information from source disc S01 T01 Con 0x14 Start 0 Len 2264366 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0) 11:50:20 #4 Text 0 File DVDCopy.cpp, Line 382 Max -1 tracks of 1 allowed to copy 1: 0 - 2264366 = 2264366, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 11:50:20 #5 Text 0 File Burncd.cpp, Line 3230 Turn on Disc-At-Once, using DVD media 11:50:20 #6 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 2264365 (503:11.40, 4422MB) 11:50:20 #7 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 11:50:20 #8 Text 0 File DlgWaitCD.cpp, Line 2433 Recorder: Image Recorder; CD type reading failed ATIP Data: ? 11:50:20 #9 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= 11:50:20 #10 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 2264366 (2264366) = #2264366/503:11.41 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2264366 blocks [Image Recorder] -------------------------------------------------------------- 11:50:20 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4637421568, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2264366 | lead-out | 1 | 0x41 | 0x00 11:50:20 #12 Phase 120 File dlgbrnst.cpp, Line 1832 Creating the image for burning 11:50:20 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:58:07 #14 Text 0 File WriterStatus.cpp, Line 116 < Image Recorder > start writing Lead-Out at LBA 2264366 (228D2Eh), lenght 0 blocks 11:58:07 #15 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 11:58:07 #16 Phase 121 File dlgbrnst.cpp, Line 1832 Creating Image completed successfully ===== Disc-Copy over image - 2nd step : Burn the image ... 11:58:14 #1 Text 0 File Reader.cpp, Line 127 Reader running 11:58:14 #2 Text 0 File Writer.cpp, Line 122 Writer HL-DT-ST DVDRAM GSA-4163B running 11:58:14 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366 Image was written as DAO. DAOI: MediaCatalogNumber = '' TocType = 0x40 Finalized = 1 First/Last Track = 1 / 1 1: ISRC = '' Blocksize = 2048 TrackMode = 'TRM_DATA_MODE1' TrackConfig = 0x00 First/Last Index = 0 / 1 Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 4637421568 CUES: 0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00 1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00 2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00 3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=503:11.41 ( 2264366) RecDep=0x00 MTYP: Mediumtype = DVD (old format) (0x1C) Image file name: <C:\Documents and Settings\Neath\Mes documents\TempImage.nrg> 11:58:14 #4 Text 0 File Burncd.cpp, Line 3230 Turn on Disc-At-Once, using DVD media 11:59:39 #5 Text 0 File DlgWaitCD.cpp, Line 267 Last possible write address on media: 2295103 (510:01.28, 4482MB) Last address to be written: 2264365 (503:11.40, 4422MB) 11:59:39 #6 Text 0 File DlgWaitCD.cpp, Line 279 Write in overburning mode: NO (enabled: CD) 11:59:39 #7 Text 0 File DlgWaitCD.cpp, Line 2433 Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R Disc Manufacturer ID: DAXON, Media Type ID: AZ2, Product revision number: 0 Disc Application Code: 0, Extended Information Indicators: 3 11:59:39 #8 Text 0 File DlgWaitCD.cpp, Line 445 >>> Protocol of DlgWaitCD activities: <<< ========================================= Insert empty disc to write to. (Medium in drive: Unknown. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-RAM; DVD+R DL.) Disc not writeable. Insert writeable disc. (Medium in drive: DVD+R. Medium required by compilation: DVD+R/RW; DVD-R/RW; DVD-RAM; DVD+R DL.) 11:59:39 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - DVD-ROM) 2 indices, index0 (150) not provided original disc pos #0 + 2264366 (2264366) = #2264366/503:11.41 not relocatable, disc pos for caching/writing not required/not required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2264366 blocks [HL-DT-ST DVDRAM GSA-4163B] -------------------------------------------------------------- 11:59:39 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043 Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4637421568, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2264366 | lead-out | 1 | 0x41 | 0x00 11:59:39 #11 Phase 36 File dlgbrnst.cpp, Line 1832 Burn process started at 8x (11 080 KB/s) 11:59:39 #12 Text 0 File ThreadedTransferInterface.cpp, Line 2643 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 11:59:39 #13 Text 0 File Cdrdrv.cpp, Line 8821 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD+R (10), Part Version: 1 Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 26053F h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Disc Application Code: 0 / 0 h Extended Information indicators: 3 h Disc Manufacturer ID: DAXON... Media type ID: AZ2 Product revision number: 0 Number of Physical format information bytes in use in ADIP up to byte 63: 56 Media Specific [16..63]: 00 00 03 44 41 58 4F 4E - 00 00 00 41 5A 32 00 38 ...DAXON...AZ2.8 23 54 37 11 00 56 71 00 - BE 6B 15 15 0B 0B 08 08 #T7..Vq..k...... 01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................ 11:59:39 #14 Text 0 File DVDR.cpp, Line 5008 Drive: HL-DT-ST DVDRAM GSA-4163B Book Type request [LG]: DVD-ROM Changing the Book Type was finished successfully, return code 0 11:59:39 #15 CDR -1207 File DVDR.cpp, Line 4938 Book Type automatically set to: DVD-ROM 11:59:39 #16 Text 0 File DVDPlusRW.cpp, Line 655 Start write address at LBA 0 DVD high compatibility mode: Yes 11:59:48 #17 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x03400000 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 11:59:57 #18 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x0BD00C00 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x20 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 11:59:57 #19 Text 0 File Mmc.cpp, Line 19224 Writer-Buffer for HL-DT-ST DVDRAM GSA-4163B\H2 T1 reduced to 32768Bytes 12:00:06 #20 SCSI -500 File Cdrdrv.cpp, Line 1436 SCSI Exec, HA 2, TA 1, LUN 0, buffer 0x0BD00C00 Status: 0x02 (0x03, SCSI_ABORTED) HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED) TA-Status 0x00 (0x00, OK) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x26 Sense Qual: 0x02 CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x10 0x00 0x00 0x00 Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x26 0x02 12:00:06 #21 CDR -500 File Writer.cpp, Line 311 SCSI command aborted HL-DT-ST DVDRAM GSA-4163B\H2 T1 12:00:10 #22 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 12:00:12 #23 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 12:00:19 #24 Phase 127 File dlgbrnst.cpp, Line 1832 Generating DVD high compatibility borders 12:01:29 #25 Phase 129 File dlgbrnst.cpp, Line 1832 Generating DVD borders completed successfully 12:01:29 #26 Phase 38 File dlgbrnst.cpp, Line 1832 Burn process failed at 8x (11 080 KB/s) Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=7.1.0.188 , size=24832 bytes, created 2004-11-10 17:30:18 Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

personne ne sait comment le résoudre ce probleme ?

Bonsoir, Vous avez essayé de graver quoi comme dvd? A+[idee]

un dvd karaoke est ce qu,il est possible que le dvd est proteger ? merci d,avoir repondu

Re- Oui, essayez avec ceci,normalement cela doit marcher. http://www.slysoft.com/fr/quel-profil-dois-je-utiliser-pour-les-cd-karaoke-faq.20.450.html Logiciel clonecd. a+[approuve]

resalut c,est un dvd karaoke que je vx graver pas un cd et j,ai essayé de graver avec Nero et aussi avec alcohol 120% et tout deux m'indique qu,il y a une erreur. merci

Depuis la version 5.2.6.1 de clonecd,il supporte les dvd. [smile]

bonjour maintenant mon dvd ne reconnait plus mon dvd vierge (dvd+R)que je dois faire maintenant ? retourner le lecteur ?

Bjr as tous, si j'ai bien compris lorsque tu graves un DVD celui plante a la fin de la gravure...et maintenant il ne reconnait plus dutous tes DVD vierges... 1°)Est ce a chaque fois ? 2°)Meme probleme avec des CD ? 3°)Marque des DVD vierges ? 4°)Marques du graveur ? As tu un message d'erreur de Néro ? ou seulement un rapport d'erreur de microsoft ? 5°)As tu mis a jour récemment le firmware de ton graveur DVD ? tu peut deja intaller la derniere version de Néro, ensuite 6°)qu'elles méthodes d'ecriture utilises tu ? piste par piste ou disque entier ??? 7°)finalises tu des DVD ? tu peut deja réinstaller les pilote ASPI : http://gowap2002.free.fr/html/download.php?f=aspicheck réinstaller la derniere version de Néro : ftp://ftp6.de.nero.com/Nero-6.6.0.16.exe ensuite pour ton infos supprime la clefs logiciel de Nero qui est dans ton rapport de ton message...car des petits malin risque de l'utiliser pour faire fonctionner leur démos de Néro... voila tient nous au courants @+[chinois][chinois][bigsmile]

bonjour c'est gentile de ta part de me repondre voici mes reponse: 1/ oui a chaque fois 2/ non 3/marque BENQ 4/LG + message erreur provient de Nero 5/les mises a jours sont fait 6/disque entier 7/quest tu vx dire ? je vais essayer le dernier truc qu,on me donne après ca si le graveur ne fonctionne pas je vais le retourner. merci